NSW E706A
In Stock
6-Port Full Gigabit PoE Switch
- Supports IEEE 802.3x full-duplex flow control and Backpressure
- The PoE port supports the priority mechanism. When the remaining power is insufficient, the power of the high-priority port is given priority to avoid overloading the device
- Low power consumption, galvanized steel casing, no fan
- Self-developed power supply, high redundancy design, providing long-term and stable PoE power output
- 4×10/100/1000Base-T PoE ports (Data/Power) and 2×10/100/1000Base-T uplink RJ45 ports (Data)
- Supports 10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X self-adaption
- Jumbo Frame: 9.2K, Buffer Memory: 2M, MAC: 8K
- Built-in power supply, AC100~240V 50-60Hz 1.1A, Total Power / Input: 65W
- Operating Temp/Humidity: -20~+55°C; 5%~90% RH Non-condensing
- Supports desktop and wall-mounted installation
- Lightning protection: 4KV 8/20us, Protection level: IP30
- Certification: CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B, RoHS
- Warranty: 1 year
- Day and night customer service
Description
Technical Spec
| Fixed Port | 4*10/100/1000Base-T PoE ports (Data/Power), 2*10/100/1000Base-T uplink RJ45 ports (Data) |
| Ethernet Port | Port 1-6/1-10 support 10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X self-adaption |
| Twisted Pair Transmission | 10BASE-TX: Cat5 or later UTP(≤250 meter), 100BASE-TX: Cat5 or later UTP(≤100 meter) |
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3x |
| Forwarding Mode | Store and Forward(Full Wire Speed) |
| Switching Capacity | 12Gbps (Non-blocking) |
| Forwarding Rate@64byte | 8.93Mpps |
| MAC | 8K |
| Buffer Memory | 2M |
| Jumbo Frame | 9.2K |
| LED Indicator | Power: PWR (Green), Network: Link (Green), PoE: PoE (Green) |
| MTBF | ≥100000h |
| PoE Port | Port 1 to 4 |
| Power Supply Pin | Default 1/2(+), 3/6(-) |
| Max Power Per Port | 30W, IEEE802.3af/at |
| Total Power/Input | 65W/ (AC100-240V) |
| Power Consumption | Standby<5W, Full load <65W |
| Power Supply | Built-in power supply, AC100~240V 50-60Hz 1.1A |
| Operation TEMP / Humidity | -20~+55°C;5%~90% RH Non condensing |
| Storage TEMP / Humidity | -40~+75°C;5%~95% RH Non condensing |
| Dimension (L*W*H) | 140*115*40mm |
| Net / Gross Weight | <0.55kg / <0.8kg |
| Installation | Desktop, wall-mounted |
| Lightning Protection / Protection Level | Lightning protection: 4KV 8/20us, Protection level: IP30 |
| Certification | CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B, RoHS |
| Warranty | 1 year |
Be the first to review “NSW E706A”
Reviews
There are no reviews yet.